Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

£9.9
FREE Shipping

Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipe, stakes and wall clips are used to secure the tube in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls and fences. Anchor and fix the supply pipe in place using pipe stakes and wall clips. The ideal placement of stakes and wall clips for the main supply pipe is one every 50-150cm. Our range of sprinklers is vast with Hunter Sprinklers, Orbit sprinklers, rolland sprinklers, Naan Sprinklers, Rainbird sprinklers, Toro sprinklers as well as specialist items such as the Manurain sprinkler for slurry and sewage. These sprinklers can be used for Irrigation, Cooling, Propagation, Dust suppression, damping down, and many other uses. Connect the micro supply pipe to the main supply pipe by punching a hole in the main line with an irrigation hole punch and then inserting a tube adaptor into that hole. The tube adaptor creates an outlet for the micro supply pipe to connect to. Connect the other end of the micro supply pipe to the inlet of the micro spray stake.

Metres of 13mm Irrigation Supply Pipe - This is the primary carrier of water and runs past all containers we wish to provide water for. Dosatron are probably the UK's best selling water powered injectors. These injector are used in Horticulture and other industries. The recently release Dosatron D3GL Greenline Fertiliser is currently on special introductory offer. For many customers and contractors it is preferable to undertake a full or partial installation of a system themselves. We are please to offer a service of design and supply or partial installation for most types of irrigation systems. These systems would be designed to provide the same quality of Irrigation system we would provide in one of our own installations be it a private garden Irrigation system or a Bowling green irrigation system. It is also possible to insert the micro spray heads directly into the main supply pipe by simply punching a hole using the irrigation hole punch, and then inserting the inlet of the micro spray into the punched hole. If you are using micro sprays on stakes, attach the micro-spray to the stake first, then position the stake in the ground as per your plan. Next, cut a length of micro pipe to reach from the main supply pipe to the inlet of the stake. We should aim to have a maximum of 30 cm of the micro tube to run from the main supply pipe to the micro spray.

Hozelock

Nut and Tail Tap Adaptor - Connect each of the water timer's outlets to the main supply pipe used in our system. One for each outlet.

TOP TIP: Position sprays placed along edges or in corners 2-5 cm from the edge to prevent overspray onto paths, fences and walls. To accurately determine how much supply pipe we need for our irrigation system, we can draw a route the pipe will take from the water source to your irrigation system's endpoint(s) on the map we previously created. elbows, tee connectors, stop ends, etc. - Based on the plan's requirements, choose 13mm connectors to guide the pipe around the garden and terminate pipe runs. Vari-Flow Spike Jets - These are pre-assembled to save on installation time. They feature a microjet spray head on top of a stake, a flow control valve to control spray radius, a short length of micro pipe already fitted and a tube adaptor. We choose six of the 180° versions and two of the 90° versions for our installation.A micro spray irrigation system consists of a simple network of pipes with low-volume micro-sprays attached. These micro-sprays have been designed to irrigate or water small to medium size planting areas. The low-volume sprays installed for landscape and horticultural applications deliver a fine water spray covering one to three metres. Sprays used for agricultural applications, such as watering under vines and orchards, have a larger spray radius. A micro-spray irrigation system can provide efficient and precise water delivery to targeted areas in your landscape, nursery or orchard. To make sure your micro-spray system is performing at its best year after year, we should take some steps before the winter months set in and any freezing conditions. TOP TIP: If you pierce a hole in the wrong place, use a micro blanking plug (aka Goof Plug) to close and seal the hole.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop